Okay, so in short, I have 2 main problems with zombies and their spawns. 1.) I made a new room, upon opening the door, even though it is in the same zone as the other rooms and I have put path nodes, zombies stop and the door until I walk out. I need help with this. 2.) How do you make zombies spawners active once a door is triggered? This would be very helpful.

1) did you select the DYNAMICPATH spawnflag on the parts that make up the door in radiant ( model/brush/clips )
2) you need to add zones and make the trigger for the door activate the new zone. Look for some tutorials, there's plenty out there ( here for example: https://confluence.ugx-mods.com/display/UGXMODS/World+at+War+Modtools )

1) did you select the DYNAMICPATH spawnflag on the parts that make up the door in radiant ( model/brush/clips )
2) you need to add zones and make the trigger for the door activate the new zone. Look for some tutorials, there's plenty out there ( here for example: https://confluence.ugx-mods.com/display/UGXMODS/World+at+War+Modtools )

Thanks, I'll try both now. Do I need two separate zones, even if one zone stretches to the other room?

1) did you select the DYNAMICPATH spawnflag on the parts that make up the door in radiant ( model/brush/clips )
2) you need to add zones and make the trigger for the door activate the new zone. Look for some tutorials, there's plenty out there ( here for example: https://confluence.ugx-mods.com/display/UGXMODS/World+at+War+Modtools )

Also, from what the tutorial on debris, doors, and zombies, these will be a one time spawner. I guess I should check, but I just wanted to check if you knew.

---

Double Post Merge: October 28, 2017, 03:38:21 pm

---

1) did you select the DYNAMICPATH spawnflag on the parts that make up the door in radiant ( model/brush/clips )
2) you need to add zones and make the trigger for the door activate the new zone. Look for some tutorials, there's plenty out there ( here for example: https://confluence.ugx-mods.com/display/UGXMODS/World+at+War+Modtools )

I know I keep asking a lot, I looked through multiple tutorials on that page. They only state that one zombie will spawn from the spawners. How to I activate it on a trigger, even if it has the trigger has target and targetname code.

1) did you select the DYNAMICPATH spawnflag on the parts that make up the door in radiant ( model/brush/clips )
2) you need to add zones and make the trigger for the door activate the new zone. Look for some tutorials, there's plenty out there ( here for example: https://confluence.ugx-mods.com/display/UGXMODS/World+at+War+Modtools )

Hey, I tried the tutorials. None worked. I got it to work (kind of). By that, I mean I found a video by GAM3VIDS, who is a very good YouTuber. I did what he said with three separate and new maps, that is what worked, is me doing it right. The zombies still will not spawn. I'm really aggrivated. Since I got Call of Duty World at War, I've wanted to make maps. I'll be very angry if my new found ability is not working, as I can finally do this. I don't want to give up, I've had multiple errors in mapping with different games, some leading to 3 months of research, but I have been able to rip the error out of the way and make maps and mods, this is most likely no different. If needed, I can send screenshots and my .gsc codes.

If you just do one of these:

https://confluence.ugx-mods.com/display/UGXMODS/Ultimate+Guide+to+Zones+in+v1.4+Maps
https://confluence.ugx-mods.com/pages/viewpage.action?pageId=1146934

The spawners will work with zones ( so yes you need to create new zones ).
When you open a door into a new zone it will activate all the spawners in that zone..

If you just do one of these:

https://confluence.ugx-mods.com/display/UGXMODS/Ultimate+Guide+to+Zones+in+v1.4+Maps
https://confluence.ugx-mods.com/pages/viewpage.action?pageId=1146934

The spawners will work with zones ( so yes you need to create new zones ).
When you open a door into a new zone it will activate all the spawners in that zone..

Oh my God! Thank you! It has worked, now I have another problem, I truly hate to bother. Even though I have 2 zones, "start_zone" and "zone1", my zombies in my "start_zone" will not move at the start of the game, e

If you just do one of these:

https://confluence.ugx-mods.com/display/UGXMODS/Ultimate+Guide+to+Zones+in+v1.4+Maps
https://confluence.ugx-mods.com/pages/viewpage.action?pageId=1146934

The spawners will work with zones ( so yes you need to create new zones ).
When you open a door into a new zone it will activate all the spawners in that zone..

Sorry, post ended for some reason, accidentally posted early. Even at the start before opening a door, zombies in "start_zone" will not move, but they will spawn.