Call of Duty 5: World at War => Help Desk => Scripting => Topic started by: mini0013xx on August 03, 2017, 09:43:32 pm
Title: Player play music
Post by: mini0013xx on August 03, 2017, 09:43:32 pm
I am releasing a singleplayer map at the end of this month. I am wanting to put music in my level.
Code Snippet
Plaintext
music() { play = getent("player", "targetname"); trig = getent("music1", "targetname");
trig waittill("trigger"); play playsound("mx_fubar"); }
Noted the player has the targetname "player" and there is a trigger named "music1".
This is the code that I was using to play the music. It works when I am playing audio from other entities (ie planes and tanks) but it is not working for when I want the music to play. Any idea why?
Any help will be appreciated.
Title: Re: Player play music
Post by: codmoddd1234 on August 04, 2017, 10:47:06 am
Music states is what i would use. Look at the folder "option 1" instructions.txt. Its easy and works. // Then after testing look at "option 2" folder. It uses mostly the same files except you can use triggers in radiant and use script_noteworthy for playing different music in your map.
Music states is what i would use. Look at the folder "option 1" instructions.txt. Its easy and works. // Then after testing look at "option 2" folder. It uses mostly the same files except you can use triggers in radiant and use script_noteworthy for playing different music in your map.
// Don't give the player the default loadout, we want to specify it for our custom made map level.dodgeloadout = true; // Sets up all of the FX in the level maps\tokyo_fx::main(); // _load, sets up all of the basic entity behaviors maps\_load::main(); // Sets the player's weapon loadout... This line should be right after _load::main(), and no waits/delays before it. set_loadout(); // Sets up ambient sounds maps\tokyo_amb::main(); // Sets up "canned" animations maps\tokyo_anim::main();
// Get the bad guys( we should make them into a prefab so easier to implement in different maps ) level.Friendly_Spawns = getEntArray( "beach_ally", "targetname" ); assertex( isdefined( level.Friendly_Spawns ), "The required Allied NPCs are not in the map." ); /* level.Friendly_Spawns2 = getEntArray( "city_ally", "targetname" ); assertex( isdefined( level.Friendly_Spawns2 ), "The required Allied NPCs are not in the map." ); */ // Get our custom spawning system trigs level.Friendly_Triggers = getEntArray( "beachtrig", "targetname" ); assertex( isdefined( level.Friendly_Triggers ), "There are no spawn triggers in the map." ); array_thread( level.Friendly_Triggers, ::spawnTrigThink ); level.Friendly_Triggers2 = getEntArray( "citytrig", "targetname" ); assertex( isdefined( level.Friendly_Triggers2 ), "There are no spawn triggers in the map." ); array_thread( level.Friendly_Triggers2, ::spawnTrigThink );
level.campaign = "american"; //return; } /* // Precache's / sets the list of weapons to give to the player when he spawns in PrecacheItem( "colt" ); PrecacheItem( "m1carbine" ); PrecacheItem( "fraggrenade" ); PrecacheItem( "molotov" ); add_weapon( "colt"); add_weapon( "m1carbine" ); add_weapon( "fraggrenade" ); add_weapon( "molotov" ); // Sets the player's offhand throw weapon (aka smoke/flash) set_secondary_offhand( "molotov" ); // Sets the player's default (if he does not have a pistol) laststand pistol. set_laststand_pistol( "colt" );
// Sets the player's viewarms set_player_viewmodel( "viewmodel_usa_marine_arms"); // Sets the player's viewarms when attacked by an enemy in a melee sequence or if a canned animation calls for them set_player_interactive_hands( "viewmodel_usa_marine_player" ); // Switches the player's weapon once he spawns in set_switch_weapon( "m1carbine" ); // Sets the campaign, which is used for battlechatter and other various scripts level.campaign = "american"; // Precaches the 3rd person model (for when playing coop) mptype\player_usa_marine::precache(); */ }
Initial() { iprintlnbold( "Take the beach." ); set_vision_set("tokyo", 0.5);
end() { endtrig = getent("end", "targetname"); endtrig waittill("trigger"); iprintlnbold( "Great job! You've landed a beach head in Tokyo!");
wait(10);
iprintlnbold("Thank you for playing!");
wait(2);
iprintlnbold("Mapped and scripted by Cayden Berry"); /* for (i = 0; i < players.size; i++) { // fade to black fadetowhite[i].x = 0; fadetowhite[i].y = 0; fadetowhite[i].alpha = 0;
// Fade into white fadetowhite[i] FadeOverTime( 0.2 ); fadetowhite[i].alpha = 1; } */ wait(3);
iprintlnbold("Special thanks to ugx-mods.com user codmoddd1234 for helping me with the FX!");
wait(6);
iprintlnbold("Quit to return to the main menu"); nextmission(); }
e4_strat() {
}
water_settings() { /* Water Dvars Default Values What They Do ====================================================================== r_watersim_enabled default = true Enables dynamic water simulation r_watersim_debug default = false Enables bullet debug markers r_watersim_flatten default = false Flattens the water surface out r_watersim_waveSeedDelay default = 500.0 Time between seeding a new wave( ms ) r_watersim_curlAmount default = 0.5 Amount of curl applied r_watersim_curlMax default = 0.4 Maximum curl limit r_watersim_curlReduce default = 0.95 Amount curl gets reduced by when over limit r_watersim_minShoreHeight default = 0.04 Allows water to lap over the shoreline edge r_watersim_foamAppear default = 20.0 Rate foam appears at r_watersim_foamDisappear default = 0.78 Rate foam disappears at r_watersim_windAmount default = 0.02 Amount of wind applied r_watersim_windDir default = 45.0 Wind direction( degrees ) r_watersim_windMax default = 0.4 Maximum wind limit r_watersim_particleGravity default = 0.03 Particle gravity r_watersim_particleLimit default = 2.5 Limit at which particles get spawned r_watersim_particleLength default = 0.03 Length of each particle r_watersim_particleWidth default = 2.0 Width of each particle */
disableSpawners1() { for( x = 0 ; x < level.Friendly_Spawns.size ; x++ ) { level.Friendly_Spawns[x].count = 0; } }
disablespawners(spawner) { for( x = 0 ; x < level.spawner.size ; x++ ) { level.spawner[x].count = 0; } }
// This will precache and set the loadout rather than duplicate work. add_weapon( weapon_name ) { PrecacheItem( weapon_name ); level.player_loadout[level.player_loadout.size] = weapon_name; }
// This sets the secondary offhand type when the player spawns in set_secondary_offhand( weapon_name ) { level.player_secondaryoffhand = weapon_name; }
// This sets the the switchtoweapon when the player spawns in set_switch_weapon( weapon_name ) { level.player_switchweapon = weapon_name; }
// Sets the player's handmodel used for "interactive" hands and banzai attacks set_player_interactive_hands( model ) { level.player_interactive_hands = model; PrecacheModel( level.player_interactive_hands ); }
Got any idea why it won't play? Any help will be greatly appreciated, thank you.
Title: Re: Player play music
Post by: codmoddd1234 on August 12, 2017, 07:53:50 am
// one or both of these is wrong sound,Tokyo,Music,all_sp sound,music,tokyo,all_sp // It should prob be sounds,tokyo,tokyo,all_sp
// all your sp weapon sounds can be done with one line sound,weapons,audio_test_tuey,all_sp
// make sure to put a space after // in your csv files otherwise it skips the next lines. There is alot of them in your zone_source/tokyo.csv //weapon,sp/type99_lmg_bipod....wrong // weapon,sp/type99_lmg_bipod....right
Im guessing its skipping over lots of stuff in your csv.
Title: Re: Player play music
Post by: mini0013xx on August 12, 2017, 03:15:42 pm
// one or both of these is wrong sound,Tokyo,Music,all_sp sound,music,tokyo,all_sp // It should prob be sounds,tokyo,tokyo,all_sp
// all your sp weapon sounds can be done with one line sound,weapons,audio_test_tuey,all_sp
// make sure to put a space after // in your csv files otherwise it skips the next lines. There is alot of them in your zone_source/tokyo.csv //weapon,sp/type99_lmg_bipod....wrong // weapon,sp/type99_lmg_bipod....right
Im guessing its skipping over lots of stuff in your csv.
So I added the spaces after all of the // (which makes sense now that I didn't think about it), however it isn't doing anything to get the music to play. I understand how music states are supposed to work after reading the scripts of the official levels, but it still isn't working so I must be doing something wrong. Either that or world at war isn't able to access my sound files for some reason or another.
here is the csv
Code Snippet
Plaintext
// NOTE: If you add a comment, put a space after the double forward slash or you will get issues ignore,code_post_gfx ignore,common
// Don't give the player the default loadout, we want to specify it for our custom made map level.dodgeloadout = true; // Sets up all of the FX in the level maps\tokyo_fx::main(); // _load, sets up all of the basic entity behaviors maps\_load::main(); // Sets the player's weapon loadout... This line should be right after _load::main(), and no waits/delays before it. set_loadout(); // Sets up ambient sounds maps\tokyo_amb::main(); // Sets up "canned" animations maps\tokyo_anim::main();
// Get the bad guys( we should make them into a prefab so easier to implement in different maps ) level.Friendly_Spawns = getEntArray( "beach_ally", "targetname" ); assertex( isdefined( level.Friendly_Spawns ), "The required Allied NPCs are not in the map." ); /* level.Friendly_Spawns2 = getEntArray( "city_ally", "targetname" ); assertex( isdefined( level.Friendly_Spawns2 ), "The required Allied NPCs are not in the map." ); */ // Get our custom spawning system trigs level.Friendly_Triggers = getEntArray( "beachtrig", "targetname" ); assertex( isdefined( level.Friendly_Triggers ), "There are no spawn triggers in the map." ); array_thread( level.Friendly_Triggers, ::spawnTrigThink ); level.Friendly_Triggers2 = getEntArray( "citytrig", "targetname" ); assertex( isdefined( level.Friendly_Triggers2 ), "There are no spawn triggers in the map." ); array_thread( level.Friendly_Triggers2, ::spawnTrigThink );
Remove the lines with all_mp unless you need them for some reason. Use my csv and files. All you have to do is replace mapname and sp_ examplemap with tokyo in the files. Try in a new map. Then work backwards and add it to your map.